How to Install a Battery-Operated Wireless Doorbell

It will be much easier to install a battery-operated wireless doorbell than to install a wired doorbell. Take INTENDVISION wireless doorbell for example. This wireless doorbell kit contains 2 plug in receivers and 1 remote push button transmitter. Of course, the push button is operated by an alkaline.

Firstly, you need to install the battery. There is a little slot in the bottom of the push button, so just insert a flat-screwdriver right there and pop it, then remove the cover. All you have to do next is to install the battery provided. Piece of cake!

Secondly, you can plug in the receivers to the wall outlet. You can plug in the kitchen, living room, basement or anywhere you like. Press the music button to choose the music you like. This wireless doorbell kit offers a wide selection of 36 chimes including common chimes such as classic "ding dongs", Christmas tunes, birthday songs and even more pleasant melodies. I guess it will take a little while if you want to check all the 36 chimes before choosing your favorite rings. You can also adjust the volume of the rings because this doorbell has 4 volume level which range from 25 db to 80 db.  Silent mode with just LED flash is available when you don't want to be disturbed by the visitors. Convenient switch between chime mode and silent mode. When the button is pressed, both the doorbell transmitter and receivers flash at the same time.

Lastly, stick the remote push button to the door frame with the double stick tape provided, or you can mount it with a drill stuff because it also provide screws and anchors. The whole installation will take less than 10 minutes. How easy it is!

BTW, it is said the battery can stand for up to 15 months, so you do not worry about replacing battery frequently.